SPECIFICATIONS
- Heavy-duty thermostatically controlled oven 36" wide can be used as support base for cooktops, worktops, or as a stacked oven. Oven interior is stainless steel with a two-piece cast iron oven bottom and stainless steel removable drip tray. Oven doors are counterweighted: no door springs requiring replacement. Oven cavity size allows sheet pan to be front-to-rear or side-to-side.
- Oven exterior bottom is insulated for cooler floor temperatures. No damage to poured floors.
- Oven incorporates a front venting flue for more consistent temperatures, and less heat escapes when door is opened.
- Unit has stainless steel front, sides, and welded steel frame. Gas supply is interconnected from top-mounted cooktop.
STANDARD FEATURES
- 35,000 Btu oven burner with standing pilot
- Pilot safety valve in cool zone
- 150 to 550 degree thermostat in cool zone
- #304 stainless steel insulated exterior oven bottom
- Two-piece cast iron interior oven bottom
- Four position rack supports
- Two heavy-duty chrome plated racks
- Zamak die cast knobs with set screws
- Stainless steel front and sides
- Welded body construction
- Hinged kick plate
- Counterweighted oven door
- Heavy-duty integral riser mount
- Adjustable legs 6" high with plate mounting
OPTIONS
- Stainless steel back
- Porcelain oven interior
- Rear gas connection
- 6" high swivel casters, two with brakes
- 6" high adjustable casters with 1" adjustment
- Double stacked ovens (see product specification sheet)
UTILITY INFORMATION
| Model |
Description |
Gas (BTU/Hr) |
Approx. SHP WT. |
| V36SO |
Standard Oven Base |
35,000 |
475 lb |
| V36SOP |
Standard Oven Base with porcelain interior |
35,000 |
475 lb |
See separate spec sheet for convection oven
GAS
Each unit to have a 1 1/4" front manifold that couples to adjacent equipment or is capped on ends. A 1" male NPT rear gas connection may be used for a gas supply or capped if supply is from adjacent unit(s). Minimum gas supply is 6" W.C. for natural gas and 11" W.C. for propane. Operating Pressure is 5" W.C. for natural gas and 10" for propane at the manifold. All units require a regulated gas supply (pressure regulator must be ordered as an option).
ELECTRICAL
No electrical requirements for top modules. Only convection oven base or refrigerated base requires electricity.
EXHAUST
Installation under an exhaust hood is required.
Specify type of gas when ordering. Specify altitude when above 2000 ft.
Note: All Viking units are modular. Rangetops are separate units and have separate model numbers from bases. To complete a range there must be a base item added, such as an oven, cabinet base, refrigerated base, or legs.
Example: A 6-burner range with oven would be a V36B6 plus a V36SO.
Note: When used as counter units, the Tall Back risers/shelves are not available. Tall backs are for units with an oven or cabinet base only. Viking Commercial products are not approved or recommended for residential use.
Note: In line with company policies, Viking Range Corporation reserves the right to change materials and specifications without notice.
